✨ New Arrivals Just Dropped!Explore
Malcolm Gen II Long Scope Reticles
HomeStore

Malcolm Gen II Long Scope Reticles

Malcolm Gen II Long Scope Reticles

Select Style
From $20.70

Original: $69.00

-70%
Malcolm Gen II Long Scope Reticles—

$69.00

$20.70

The Story

Compatibility: Only compatible with Malcolm 6X Gen II Long Scope.

Included: The reticle is pre-installed within the brass housing tube.

(Note: The Malcolm 6X Gen II Long Scope ships from the factory with the 0.001" fine crosswire already installed.)

Reticle Replacement Procedure: To swap your reticle, follow these steps carefully:

  • Step 1: Disassemble. Remove the eyepiece and loosen the two set screws located on the reticle lock ring.

  • Step 2: Remove the Reticle Tube. Elevate the objective end of the scope to a maximum angle of 20 degrees. Carefully tap the objective end with a dead blow hammer, and be prepared to catch the brass reticle housing as it slides out of the eyepiece end.

  • Step 3: Handle with Care. Warning: Do not touch the exposed reticle wire. The wire is extremely fragile and will easily deform or break upon contact. Handle the assembly by the brass tube only.

Malcolm Gen II Long Scope Reticles - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Malcolm Gen II Long Scope Reticles - Image 3

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Malcolm Gen II Long Scope Reticles - Image 4

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

Compatibility: Only compatible with Malcolm 6X Gen II Long Scope.

Included: The reticle is pre-installed within the brass housing tube.

(Note: The Malcolm 6X Gen II Long Scope ships from the factory with the 0.001" fine crosswire already installed.)

Reticle Replacement Procedure: To swap your reticle, follow these steps carefully:

  • Step 1: Disassemble. Remove the eyepiece and loosen the two set screws located on the reticle lock ring.

  • Step 2: Remove the Reticle Tube. Elevate the objective end of the scope to a maximum angle of 20 degrees. Carefully tap the objective end with a dead blow hammer, and be prepared to catch the brass reticle housing as it slides out of the eyepiece end.

  • Step 3: Handle with Care. Warning: Do not touch the exposed reticle wire. The wire is extremely fragile and will easily deform or break upon contact. Handle the assembly by the brass tube only.